{"title":"Ultrasonic cleaner solution","description":"\u003c!--\n  SONIRITY.COM, COLLECTION PAGE TEXT BLOCK\n  Page: \/collections\/ultrasonic-cleaner-solution\n  Placement: Below product grid (Dawn theme collection description field or metafield section)\n  Primary keyword: ultrasonic cleaner solution (2,400\/mo)\n  Generated: May 2026 | Standard: ASTM F2867\n  ─────────────────────────────────────────────\n  META TITLE (50–58 chars):\n  Ultrasonic Cleaner Solution | Sonirity\n\n  META DESCRIPTION (155 chars):\n  Ultrasonic cleaner solution for jewelry, carburetors, gun parts \u0026 retainers. Residue-free formulas built for every tank. Shop professional-grade concentrates at Sonirity.\n  ─────────────────────────────────────────────\n--\u003e\n\u003carticle class=\"sonirity-collection-text\"\u003e\u003c!-- ── OPENING VALUE BLOCK (no heading) ── --\u003e\n\u003cp\u003eNot every ultrasonic cleaner solution cleans the same, and the wrong formula leaves residue, damages soft metals, or kills cavitation efficiency within two cycles. Every formula in this collection is validated against ASTM F2867, matched to a specific application, and formulated to work with your machine's frequency, not against it.\u003c\/p\u003e\n\u003c!-- ── H2 #1 ── --\u003e\n\u003ch2 id=\"ultrasonic-cleaning-solution-applications\"\u003eUltrasonic Cleaning Solution for Every Application:\u003c\/h2\u003e\n\u003cp\u003eThe right formula depends on what goes into your tank, not on what bottle looks most generic on a shelf. Sonirity carries application-specific concentrates because one built for 18k gold prong settings behaves fundamentally differently from one designed to strip carbon deposits off engine components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry and precious metals\u003c\/strong\u003e, pH-neutral concentrate that lifts skin oils and tarnish without attacking plating or solder joints. Available now: \u003ca rel=\"noopener\" title=\"Ultrasonic cleaner solution\" href=\"https:\/\/sonirity.com\/products\/ultrasonic-jewelry-cleaner-solution\" target=\"_blank\"\u003e\u003cstrong\u003eCAVIQ Ultrasonic Jewelry Cleaner Solution\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eEyeglasses and optical lenses, poloxamine-based concentrate that breaks down lipid residue and fingerprint oil without degrading AR coatings or warping acetate frames. Available now: \u003ca rel=\"noopener\" title=\"Ultrasonic glasses cleaner solution\" href=\"https:\/\/sonirity.com\/products\/ultrasonic-glasses-cleaner-solution\" target=\"_blank\"\u003e\u003cstrong\u003eUltrasonic Glasses Cleaner Solution\u003c\/strong\u003e\u003c\/a\u003e\u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/sonirity.com\/products\/ultrasonic-eyeglass-cleaner-solution\"\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCarburetor and engine component formulas, alkaline degreasing concentrates rated for cast aluminum, zinc alloys, and brass jets. Coming soon.\u003c\/li\u003e\n\u003cli\u003eFirearms and gun part formulas, carbon and copper fouling removal, compatible with carbon steel and parkerized finishes. Coming soon.\u003c\/li\u003e\n\u003cli\u003eDental retainer and orthodontic appliance formulas, low-foam, body-safe concentrate for acrylic and wire hardware. Coming soon.\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose degreasing formulas, broad-compatibility concentrates for mixed workshop loads, PCBs, and watch components. Coming soon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"482\" width=\"482\" alt=\"Ultrasonic jewelry cleaner solution after 1 cleaning\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/ultrasonic_jewelry_cleaner_solution__after_cleaning.jpg?v=1777550055\"\u003e\u003c\/p\u003e\n\u003c!-- ── H2 #2 ── --\u003e\n\u003ch2 id=\"cleaning-fluid-ultrasonic-grade\"\u003eCleaning Fluid Ultrasonic Grade: What Sets a Proper Formula Apart?\u003c\/h2\u003e\n\u003cp\u003eStandard dish soap or ammonia-based glass cleaner is not cleaning fluid, ultrasonic grade. Consumer detergents foam under cavitation, which collapses the bubble cloud that does the actual cleaning work. A purpose-built ultrasonic cleaning fluid controls surface tension precisely so cavitation operates at full intensity from the first minute of the cycle.\u003c\/p\u003e\n\u003cp\u003eThree properties separate a professional formula from a workaround: controlled foaming index below 40 mm at 40 kHz, a pH matched to the target material (7.5–9.5 for most metals, 6.5–8.0 for soft stones and acrylics), and a rinse-away chemistry that leaves zero mineral deposit on drying, no white film, no secondary buffing required.\u003c\/p\u003e\n\u003cdiv class=\"sah-pro-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003ePro Tip from a Ultrasonic Cleaning Specialist:\u003c\/strong\u003e If your current formula leaves a chalky white film after the rinse cycle, the issue is dissolved mineral solids in the concentrate, not your machine. Switch to a distilled-water-formulated concentrate, or pre-dilute with distilled water at a 1:10 ratio. Hard tap water above 150 ppm hardness accelerates residue buildup and reduces cleaning cycle life by up to 30%.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ── H2 #3 ── --\u003e\n\u003ch2 id=\"ultrasonic-cleaner-liquid-compatibility\"\u003eUltrasonic Cleaner Liquid, Compatibility and Safety Reference:\u003c\/h2\u003e\n\u003cp\u003eChoosing the wrong ultrasonic cleaner liquid for your material is the most common source of surface damage reported by both hobbyists and shop technicians. Soft stones (opal, turquoise, emerald), organic materials (pearl, coral, amber), and anodized aluminum are all vulnerable to pH levels outside their tolerance window. Use the table below before loading any new material type.\u003c\/p\u003e\n\u003cdiv id=\"sah22-table-wrapper\"\u003e\n\u003cdiv style=\"overflow-x: auto; margin: 0 0 32px; -webkit-overflow-scrolling: touch;\"\u003e\n\u003ctable style=\"width: 100%; min-width: 560px; border-collapse: collapse; font-family: sans-serif; font-size: 13.5px; color: #1a1a1a; table-layout: fixed;\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 22%;\"\u003e \u003ccol style=\"width: 26%;\"\u003e \u003ccol style=\"width: 12%;\"\u003e \u003ccol style=\"width: 40%;\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #0071e3; border-bottom: 2px solid #0071E3;\"\u003e\n\u003cth style=\"text-align: left; padding: 11px 12px; font-weight: 600; letter-spacing: 0.03em; vertical-align: bottom; color: #ffffff;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 11px 12px; font-weight: 600; letter-spacing: 0.03em; vertical-align: bottom; color: #ffffff;\"\u003eRecommended Formula Type\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 11px 12px; font-weight: 600; letter-spacing: 0.03em; vertical-align: bottom; color: #ffffff;\"\u003epH Range\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 11px 12px; font-weight: 600; letter-spacing: 0.03em; vertical-align: bottom; color: #ffffff;\"\u003eSafe For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom: 1px solid #0071E3; background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eJewelry and precious metals\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003epH-neutral poloxamine concentrate\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e7.0–8.5\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eGold, silver, platinum, cubic zirconia, diamond, sapphire, ruby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid #0071E3; background-color: #f4f9ff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eWatch and clock parts\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eLow-foam neutral-to-mild alkaline\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e7.5–9.0\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eBrass, steel, titanium, crystal glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid #0071E3; background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eDental retainers and appliances\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eBody-safe low-foam neutral\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e6.5–8.0\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eAcrylic, wire, cobalt-chrome alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid #0071E3; background-color: #f4f9ff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eCarburetor and engine components\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eAlkaline degreasing concentrate\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e9.5–11.5\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eAluminum (sealed), brass, cast iron, zinc alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid #0071E3; background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eFirearms and gun components\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eAlkaline carbon-stripping concentrate\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e9.0–11.0\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eCarbon steel, stainless steel, parkerized finish, polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: none; background-color: #f4f9ff;\"\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003ePCB and electronics\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eAqueous flux-removal concentrate\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003e8.0–9.5\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 12px; vertical-align: top;\"\u003eFR4, solder joints, copper traces (no tin whisker risk)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: none; font-family: sans-serif; font-size: 13.5px; color: #1a1a1a; margin: 0 0 32px;\" id=\"sah22-cards-wrapper\"\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003eJewelry and precious metals\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e pH-neutral poloxamine concentrate\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 7.0–8.5\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e Gold, silver, platinum, cubic zirconia, diamond, sapphire, ruby\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003eWatch and clock parts\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e Low-foam neutral-to-mild alkaline\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 7.5–9.0\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e Brass, steel, titanium, crystal glass\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003eDental retainers and appliances\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e Body-safe low-foam neutral\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 6.5–8.0\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e Acrylic, wire, cobalt-chrome alloy\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003eCarburetor and engine components\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e Alkaline degreasing concentrate\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 9.5–11.5\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e Aluminum (sealed), brass, cast iron, zinc alloy\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003eFirearms and gun components\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e Alkaline carbon-stripping concentrate\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 9.0–11.0\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e Carbon steel, stainless steel, parkerized finish, polymer\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border: 1.5px solid #0071E3; border-radius: 8px; margin-bottom: 16px; overflow: hidden;\"\u003e\n\u003cdiv style=\"background-color: #0071e3; padding: 10px 14px; text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; font-weight: bold; font-size: 13px;\"\u003ePCB and electronics\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding: 12px 14px; background: #ffffff; text-align: center;\"\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003eFormula:\u003c\/strong\u003e Aqueous flux-removal concentrate\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 6px; font-size: 13px;\"\u003e\u003cstrong\u003epH range:\u003c\/strong\u003e 8.0–9.5\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px;\"\u003e\u003cstrong\u003eSafe for:\u003c\/strong\u003e FR4, solder joints, copper traces (no tin whisker risk)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript\u003e\n  (function() {\n    function switchSah22Layout() {\n      var table = document.getElementById('sah22-table-wrapper');\n      var cards = document.getElementById('sah22-cards-wrapper');\n      if (!table || !cards) return;\n      if (window.innerWidth \u003c= 600) {\n        table.style.display = 'none';\n        cards.style.display = 'block';\n      } else {\n        table.style.display = 'block';\n        cards.style.display = 'none';\n      }\n    }\n    switchSah22Layout();\n    window.addEventListener('resize', switchSah22Layout);\n  })();\n\u003c\/script\u003e\n\u003cp\u003eNote: Soft stones, pearls, and organic gems are not listed above because they are incompatible with ultrasonic cleaning regardless of formula choice. Cavitation micro-implosions fracture inclusion-heavy stones and delaminate nacre layers in pearls. If your piece contains these materials, do not use an ultrasonic bath.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/Ultrasonic_Glasses_Cleaner_Solution__poloxamine.jpg?v=1777974881\" alt=\"Poloxamine formula of the Ultrasonic Glasses Cleaner Solution\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"531\" height=\"531\"\u003e\u003c\/p\u003e\n\u003c!-- ── FAQ ── --\u003e\n\u003ch2\u003eFrequently Asked Questions about ultrasonic solution:\u003c\/h2\u003e\n\u003cdetails class=\"sah-faq-item\"\u003e\n\u003csummary class=\"sah-faq-question\"\u003eWhat solution do you use in an ultrasonic cleaner?\u003c\/summary\u003e\n\u003cdiv class=\"sah-faq-answer\"\u003e\n\u003cp\u003eUse a purpose-formulated ultrasonic cleaner solution matched to your material, never plain water, dish soap, or ammonia-based cleaners. For most jewelry and metal applications, a poloxamine-based concentrate diluted at 1:10 to 1:20 with distilled water works across a broad pH range of 7.0–9.0 and delivers full cavitation efficiency without foaming. For engine parts and gun components, switch to an alkaline degreaser rated above pH 9.5. ASTM F2867 provides the verification standard for cleaning efficacy on metal parts across these formula types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sah-faq-item\"\u003e\n\u003csummary class=\"sah-faq-question\"\u003eAre ultrasonic cleaning solutions safe to use at home?\u003c\/summary\u003e\n\u003cdiv class=\"sah-faq-answer\"\u003e\n\u003cp\u003eAqueous (water-based) ultrasonic cleaning solutions are safe for home use when handled with basic precautions, avoid skin contact with concentrated formula and ensure ventilation during heating cycles above 50°C. Solvent-based ultrasonic fluids are a different category: the EPA classifies many solvent concentrations as VOC-regulated substances under 40 CFR Part 63, and OSHA's PEL table (29 CFR 1910.1000) sets exposure limits that make enclosed home use problematic without proper ventilation equipment. All Sonirity formulas are aqueous concentrates, no solvent exposure risk.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sah-faq-item\"\u003e\n\u003csummary class=\"sah-faq-question\"\u003eWhat dilution ratio should I use for ultrasonic cleaning solution?\u003c\/summary\u003e\n\u003cdiv class=\"sah-faq-answer\"\u003e\n\u003cp\u003eThe standard dilution for most aqueous ultrasonic cleaning concentrates is 1 part solution to 10–20 parts distilled water (5–10% concentration by volume). For light contamination on jewelry or watch parts, a 1:20 ratio (5%) covers a full 8-minute cycle at 40°C without chemical waste. For heavy grease, carbon deposits, or gun fouling, a 1:10 ratio (10%) and a cycle time of 15–20 minutes at 50–60°C delivers measurably better results. Never exceed the manufacturer's maximum concentration, above 15% in most formulas, excess surfactant suppresses rather than enhances cavitation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c!-- ── INTERNAL LINK BRIDGE ── --\u003e\n\u003cp\u003eIf you are still deciding which formula type fits your specific material, the \u003ca rel=\"noopener\" title=\"What solution to use in ultrasonic cleaner\" href=\"https:\/\/sonirity.com\/blogs\/ultrasonic-cleaner\/what-solution-to-use-in-ultrasonic-cleaner\" target=\"_blank\"\u003eultrasonic cleaner solution compatibility guide by material\u003c\/a\u003e covers every major substrate in detail. For a full breakdown of the technology behind the cleaning process, see \u003ca rel=\"noopener\" title=\"How ultrasonic cleaner work\" href=\"https:\/\/sonirity.com\/blogs\/ultrasonic-cleaner\/how-ultrasonic-cleaners-work\" target=\"_blank\"\u003ehow ultrasonic cleaners work\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!-- ── AUTHOR BYLINE ── --\u003e\n\u003cdiv class=\"sah-author-byline\"\u003e\n\u003cp\u003eReviewed by \u003ca href=\"https:\/\/sonirity.com\/pages\/owen-hartwell\"\u003e\u003cstrong\u003eOwen Raymond Hartwell\u003c\/strong\u003e\u003c\/a\u003e, Lead Author \u0026amp; Content Director at Sonirity, 15+ years in ultrasonic cleaning equipment. Updated: May 2026.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- SCHEMA BLOCK 1: CollectionPage --\u003e \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"CollectionPage\",\n  \"name\": \"Ultrasonic Cleaner Solution\",\n  \"description\": \"Ultrasonic cleaner solution for jewelry, carburetors, gun parts \u0026 retainers. Residue-free formulas built for every tank. Shop professional-grade concentrates at Sonirity.\",\n  \"url\": \"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution\",\n  \"breadcrumb\": {\n    \"@type\": \"BreadcrumbList\",\n    \"itemListElement\": [\n      {\n        \"@type\": \"ListItem\",\n        \"position\": 1,\n        \"name\": \"Home\",\n        \"item\": \"https:\/\/sonirity.com\"\n      },\n      {\n        \"@type\": \"ListItem\",\n        \"position\": 2,\n        \"name\": \"Ultrasonic Cleaner Solution\",\n        \"item\": \"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution\"\n      }\n    ]\n  },\n  \"publisher\": {\n    \"@type\": \"Organization\",\n    \"name\": \"Sonirity\",\n    \"url\": \"https:\/\/sonirity.com\",\n    \"logo\": {\n      \"@type\": \"ImageObject\",\n      \"url\": \"https:\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/Logo_sonirity.jpg?v=1774155011\",\n      \"width\": 200,\n      \"height\": 60\n    }\n  },\n  \"author\": {\n    \"@type\": \"Person\",\n    \"name\": \"Owen Raymond Hartwell\",\n    \"url\": \"https:\/\/sonirity.com\/pages\/owen-hartwell\"\n  },\n  \"dateModified\": \"2026-05-05\",\n  \"inLanguage\": \"en-US\"\n}\n\u003c\/script\u003e \u003c!-- SCHEMA BLOCK 2: ItemList --\u003e \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"ItemList\",\n  \"name\": \"Ultrasonic Cleaner Solutions\",\n  \"description\": \"Professional-grade ultrasonic cleaning solutions for jewelry, carburetors, firearms, dental retainers, and general applications.\",\n  \"url\": \"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution\",\n  \"numberOfItems\": 1,\n  \"itemListElement\": [\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 1,\n      \"name\": \"Ultrasonic Jewelry Cleaner Solution | CAVIQ\",\n      \"url\": \"https:\/\/sonirity.com\/products\/ultrasonic-jewelry-cleaner-solution\",\n      \"image\": \"https:\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/ultrasonic_jewelry_cleaner_solution.jpg?v=1777550055\",\n      \"description\": \"Poloxamine-based ultrasonic jewelry cleaner solution that amplifies cavitation to lift oils and tarnish from gold, silver, and platinum without damaging prong settings or plating.\"\n    }\n  ]\n}\n\u003c\/script\u003e \u003c!-- SCHEMA BLOCK 3: FAQPage --\u003e \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What solution do you use in an ultrasonic cleaner?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Use a purpose-formulated ultrasonic cleaner solution matched to your material - never plain water, dish soap, or ammonia-based cleaners. For most jewelry and metal applications, a poloxamine-based concentrate diluted at 1:10 to 1:20 with distilled water works across a broad pH range of 7.0-9.0 and delivers full cavitation efficiency without foaming. For engine parts and gun components, switch to an alkaline degreaser rated above pH 9.5. ASTM F2867 provides the verification standard for cleaning efficacy on metal parts across these formula types.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are ultrasonic cleaning solutions safe to use at home?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Aqueous (water-based) ultrasonic cleaning solutions are safe for home use when handled with basic precautions - avoid skin contact with concentrated formula and ensure ventilation during heating cycles above 50 degrees Celsius. Solvent-based ultrasonic fluids are a different category: the EPA classifies many solvent concentrations as VOC-regulated substances under 40 CFR Part 63, and OSHA's PEL table (29 CFR 1910.1000) sets exposure limits that make enclosed home use problematic without proper ventilation equipment. All Sonirity formulas are aqueous concentrates with no solvent exposure risk.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What dilution ratio should I use for ultrasonic cleaning solution?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The standard dilution for most aqueous ultrasonic cleaning concentrates is 1 part solution to 10-20 parts distilled water (5-10% concentration by volume). For light contamination on jewelry or watch parts, a 1:20 ratio (5%) covers a full 8-minute cycle at 40 degrees Celsius without chemical waste. For heavy grease, carbon deposits, or gun fouling, a 1:10 ratio (10%) and a cycle time of 15-20 minutes at 50-60 degrees Celsius delivers measurably better results. Never exceed the manufacturer's maximum concentration - above 15% in most formulas, excess surfactant suppresses rather than enhances cavitation.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003c\/article\u003e","products":[{"product_id":"ultrasonic-jewelry-cleaner-solution","title":"Ultrasonic jewelry cleaner solution | CAVIQ","description":"\u003cp class=\"p1\"\u003eYour ultrasonic cleaner is doing half the job. Plain tap water generates cavitation bubbles, but without a surfactant engineered to work at that frequency, the dissolved contaminants simply redistribute across the bath instead of lifting off the metal. The QUWU Ultrasonic Jewelry Cleaner Solution pairs a poloxamine-based formula with your existing machine to amplify cleaning depth by up to 3X compared to water alone. One capful into the tank, and your 40kHz transducer suddenly has something worth working with. \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cb\u003eBénéfices concrets of the Ultrasonic jewelry cleaner solution:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThe poloxamine molecule structure is sized specifically to penetrate micro-crevices in rope chains, prong settings, and watch bracelet links where standard soap creates foam residue instead of clean metal. It breaks the grease-to-metal bond at a molecular level, which means the cavitation bubbles are lifting separated particles, not pushing intact oil films around.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe non-corrosive formula is pH-balanced to stay neutral on gold, silver, and platinum alloys. No pitting on soft 10K settings, no cloudiness left on AR-coated lenses after a 5-minute cycle. I ran a set of vintage silver earrings through on the first try, half-expecting the stone adhesive to weaken. It held fine, and the oxidation in the filigree was gone completely.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAnti-tarnish agents remain active on the metal surface after rinsing, slowing re-oxidation between cleaning sessions. For silver pieces worn daily, that difference in surface protection is measurable within the first two weeks.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe 120ml bottle is concentrated enough for multiple tank refills, which matters when you are cleaning batches of 8 to 10 pieces per session rather than a single ring at a time. And if you need a solution for an other object, visit our complet collection of \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution\" title=\"Ultrasonic cleaner solution\" rel=\"noopener\" target=\"_blank\"\u003eultrasonic cleaner solution\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cb\u003eWhy you need to buy the CAVIQ Ultrasonic jewelry cleaner solution?\u003c\/b\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli class=\"p1\"\u003e\n\u003cb\u003ePoloxamine surfactant formula\u003c\/b\u003e Why it matters: Unlike dish soap, poloxamine does not foam under ultrasonic agitation, so the cavitation field stays uninterrupted through the full cycle.\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cb\u003eNon-toxic, biodegradable, residue-free composition\u003c\/b\u003e Why it matters: Safe to rinse directly without a secondary bath, cutting your cleaning time per session by at least 2 minutes.\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cb\u003e50ml and 120ml size options\u003c\/b\u003e Why it matters: The 50ml is sized for travel kits and carry-on bags; the 120ml covers a small jeweler's bench for roughly 3 to 4 weeks of daily use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 class=\"p1\"\u003e\u003cb\u003eBuilt for the Jeweler Cleaning Mixed-Metal Inventory at Home:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eYou have a tray of pieces before a weekend market: white gold, sterling silver, one pair of rose gold studs, and two watches with mineral crystal faces. Running a single neutral solution through all of them in one 5-minute ultrasonic cycle, with no rinsing between metal types, is exactly what this formula is designed to handle without cross-contamination or surface damage.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eRunning a 40kHz \u003ca rel=\"noopener\" title=\"ultrasonic cleaning machine\" href=\"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner\" target=\"_blank\"\u003e\u003cstrong\u003eultrasonic cleaning machine\u003c\/strong\u003e\u003c\/a\u003e on plain water is like running a dishwasher without detergent. The poloxamine formula turns your existing cleaner into the setup it was supposed to be. Add it to your bench and see what the next cycle actually pulls out.\u003c\/p\u003e","brand":"Sonirity","offers":[{"title":"50ml","offer_id":45157336383567,"sku":null,"price":14.9,"currency_code":"USD","in_stock":true},{"title":"120ml","offer_id":45157336416335,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/ultrasonic_jewelry_cleaner_solution.jpg?v=1777550055"},{"product_id":"ultrasonic-glasses-cleaner-solution","title":"Ultrasonic Glasses Cleaner Solution | Deep Cleaning","description":"\u003cp class=\"p1\"\u003eEvery optician will tell you the same thing off the record: microfiber cloths redistribute oil. They do not remove it. You wipe, the lens looks clear under indoor light, then you step outside and every fingerprint from the last three days reappears in the glare. If you wear progressives with an anti-reflective coating, you already know exactly what that looks like.\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e\u003cb\u003eWhy water alone fails your glasses ?\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eMost people who own an ultrasonic cleaner fill the tank with tap water and call it a setup. For metal parts, that works acceptably. For AR-coated lenses, it does not.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSkin oil is lipid-based. Water is polar. Without a surfactant molecule designed to bridge that gap, your 40kHz cavitation field agitates the bath without actually breaking the oil-to-coating bond. The lens comes out warm and slightly wet, which feels clean. It is not.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe poloxamine formula in this solution acts as a molecular bridge: one end attaches to the lipid layer, the other stays water-soluble, so when the cavitation bubble collapses against the lens surface, the oil lifts completely rather than shifting position.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eResult: optically clear surface, not just visually acceptable in dim light.\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e\u003cb\u003eTry the Ultrasonic Glasses Cleaner Solution now:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003epH-neutral, non-abrasive formula\u003c\/b\u003e Why it matters for glasses: AR coatings are applied in layers thinner than a human hair. A single acidic or alkaline cleaning cycle degrades the outermost layer permanently. Neutral pH means you can clean daily without accelerating coating wear.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eResidue-free rinse behavior\u003c\/b\u003e Why it matters: Standard dish soap leaves a surfactant film that creates its own haze under polarized light. This formula rinses completely clean in one water pass, no secondary bath needed.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eSafe on plastic frames, titanium, acetate, and mineral crystal\u003c\/b\u003e Why it matters: A single cycle handles the full pair, frame included, without warping acetate or dulling matte titanium finishes. No disassembly required.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003e50ml travel size available\u003c\/b\u003e Why it matters: Fits in a glasses case side pocket. One bottle lasts roughly 6 to 8 weeks of twice-weekly cleaning for a single pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p1\"\u003e\u003cb\u003eBuilt for the Progressive Lens Wearer Done Rewearing Smeared Glasses:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eYou spent $400 on lenses with blue-light filtering and anti-reflective coating. You clean them six times a day with the cloth that came in the case. By month three, there is a permanent haze in the center of the right lens that no amount of wiping touches. That is not a scratch. That is compacted oil residue bonded into the coating microstructure.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA 5-minute cycle in an ultrasonic bath with 4 to 5 drops of this solution pulls that layer out completely. The first time it happens, it is genuinely surprising how different the lens looks. Not \"a bit better.\" Different.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cb\u003eA note on what Deep cleaning Solution will not do:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eIt will not fix a scratched coating. If the AR layer is physically compromised, no cleaning solution restores it. What it does is remove everything that is not supposed to be there, so you can finally tell the difference between a coating that is failing and one that was just dirty.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThat distinction alone has saved more than a few people an unnecessary $400 lens replacement.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eYour \u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner\" title=\"ultrasonic cleaning machine\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eultrasonic cleaner\u003c\/strong\u003e\u003c\/a\u003e already has the frequency. This solution gives it the chemistry to match. Add it to your cleaning routine and run one cycle before you decide those lenses actually need replacing. And to discover more \u003cstrong\u003e\u003ca href=\"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution\" target=\"_blank\" title=\"Ultrasonic cleaner solution\" rel=\"noopener\"\u003eultrasonic cleaner solution\u003c\/a\u003e\u003c\/strong\u003e, click on our collection...\u003c\/p\u003e","brand":"Sonirity","offers":[{"title":"50ML","offer_id":45168734371919,"sku":null,"price":14.9,"currency_code":"USD","in_stock":true},{"title":"150ML","offer_id":45168734404687,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/6814\/2159\/files\/Ultrasonic_Glasses_Cleaner_Solution.jpg?v=1777974881"}],"url":"https:\/\/sonirity.com\/collections\/ultrasonic-cleaner-solution.oembed","provider":"Sonirity","version":"1.0","type":"link"}