Sonirity
10L Ultrasonic cleaner | SonicTitan
10L Ultrasonic cleaner | SonicTitan
☑️ Cleans What Cloths Can't Reach
☑️ Ultrasonic Cavitation Technology
☑️ Auto Shut-Off, No Over-Cleaning
☑️ Results in Minutes, No Scrubbing
Couldn't load pickup availability
What a 10-Liter Ultrasonic Cleaning Tank Actually Changes in a High-Volume Parts Workflow
The jump from a 3L or 6L bench unit to a 10-liter tank is not a question of convenience. It is a question of throughput. A watch repair technician running 12 to 18 movements a week, or a small automotive shop cycling through carburetor bodies and injector caps, hits the volume ceiling of a smaller tank within the first hour of a busy day.
The SonicTitan 10L changes that arithmetic. Its 33 x 26.8 cm footprint fits on a standard workbench, but its 10-liter SUS304 stainless steel tank accepts items up to 22 x 17 x 11 cm, which covers the full range from precision dental instruments to multi-piece carburetor assemblies. The mirror-finish black steel-titanium housing and matt black powder-coated lid are not cosmetic choices; they signal a construction tolerance built for continuous daily use, not occasional weekend cleaning.
Mode Selection by Load Type
- ● Carburetor bodies and fuel injectors: Full Wave at 55-65°C dissolves baked carbon and varnish deposits in internal galleries where brushes cannot reach, in 15 to 25-minute cycles.
- ● Watch movements and circuit boards: Semi Wave at 30-40°C reduces cavitation intensity to protect hairsprings, flux-coated traces, and fine surface finishes while still lifting oxidation and contamination.
- ● Dental instruments and surgical tools: Degas cycle first, then Full Wave at 60-70°C, reaches internal lumen walls and articulating joints that manual scrubbing misses entirely.
- ● Eyeglasses and jewelry: Semi Wave at 35-45°C cleans around stone settings and nose pad hinges without loosening adhesives or abrading anti-reflective coatings.
- ● Bearing races and precision machine components: Full Wave at max power with Degas pre-cycle removes metallic swarf and machining oils from toleranced surfaces in a single 20-minute pass.
- ● Tableware and glass: Semi Wave at 40-50°C with the stainless basket suspended above the tank floor removes mineral scale and food residue without contact abrasion across a full 10-liter load.
The Control Panel Logic That Makes a 600W Heating System Practical for Delicate Materials
A 600W heating element in a 10-liter tank reaches working temperature faster than most benchtop units in this class, but speed without precision is a liability when the load includes resin-set watch dials, lacquered circuit boards, or rubber-gasketed eyeglass frames.
The SonicTitan's digital control panel displays set temperature and actual temperature simultaneously in red LED readout, so there is no guesswork about whether the bath has reached target before the timer starts. I've run carburetor float chambers at 55°C in Full Wave mode and switched the same session to 35°C Semi Wave for the rubber accelerator pump diaphragm sitting in the same basket.
The two-zone logic on the panel, separate controls for TEMP+ and TEMP- alongside TIME+ and TIME-, makes that mid-session adjustment a four-button operation rather than a restart. The integrated brass drain valve on the right side clears the 10-liter tank without lifting or tipping; at 6.8kg empty, this unit does not get hand-poured. Overheat protection and auto shut-off run in the background at noise levels at or below 75dB, which keeps it practical in a shared workspace without ear protection for short cycles.
The Right Ultrasonic Cleaner for Anyone Whose Backlog Grew Past What a Smaller Tank Could Process
If contaminated parts are sitting in a tray waiting for a second batch cycle, the limiting factor is tank volume, not cleaning chemistry. The SonicTitan 10L resolves that constraint with a basket large enough to run a full set of injectors alongside their seats, or a tray of watch movements alongside their bridges, in a single 30-minute cycle. See whether the capacity and dual-wave control match your current cleaning load: compare it with our other ultrasonic cleaners or our specific industrial ultrasonic cleaners selection
Full Specifications: SonicTitan 10L Ultrasonic Cleaner (Model KZ-F10)
- Capacity: 10 liters
- Ultrasonic Power: 240W
- Heating Power: 600W
- Frequency: 40 kHz
- Temperature Range: 0-80°C (adjustable)
- Timer: 0-30 minutes
- Cleaning Modes: Full Wave, Semi Wave, Degas
- Transducers: 4 industrial ultrasonic transducers
- Noise Level: ≤75 dB
- Tank Material: SUS304 corrosion-resistant stainless steel
- Tank Interior Dimensions: 29.5 x 23.5 x 15 cm
- Tank Wall Thickness: 0.1 cm
- Unit Dimensions: 33 x 26.8 cm (L x W)
- Unit Height: 29.5 cm
- Maximum Item Size (Washable): 22 x 17 x 11 cm
- Product Weight: 6.8 kg
- Power Cord Length: 150 cm
- Housing Finish: Mirror-finish black steel-titanium body; matt black powder-coated lid
- Drain System: Integrated brass drain valve
- Safety Features: Overheat protection, auto shut-off, smart monitoring
- Included Accessories: Stainless steel washing basket, drain pipe, power cord
Share
FAQ - Ultrasonic cleaner
What is an ultrasonic cleaner and how does cavitation work?
An ultrasonic cleaner uses a transducer to project high-frequency sound waves (typically 40 kHz) through a liquid bath. Those waves create and collapse millions of microscopic bubbles per second a process called acoustic cavitation. Each collapse generates a localized pressure jet that physically dislodges contaminants from every surface it reaches, including recesses, hinge barrels, prong settings, and blind holes that no brush can access.
The result is a contact-free clean that outperforms manual methods in both speed and thoroughness. A professional jeweler in Denver running an ultrasonic tank for 4 minutes on a gold ring pulls out more skin oil and lotion residue than 10 minutes of brushing could reach not because the machine is more powerful, but because cavitation reaches geometry that bristles physically cannot.
How long does an ultrasonic cleaning cycle take?
Cycle time depends on material and soil type, not machine power alone. Defaulting to the longest cycle is not safer over-cycling at elevated temperature can damage coatings and loosen adhesive-held components on items that were otherwise compatible.
Glasses (light soiling) : 2–4 min 50°C
Gold / platinum jewelry : 3–6 min 60°C
Retainer / aligner (mineral deposits) : 5–8 min 45°C
Watch bracelet (no movement) 5–8 min 50°C
Dental instruments : 10–15 min 60°C
Gun parts (carbon fouling) : 15–20 min 60°C
Carburetor bodies : 15–20 min 65°C
How do I contact Sonirity support?
📧 contact.sonirity@gmail.com
For product selection guidance, order questions, returns, and technical troubleshooting. For fastest response on product compatibility questions, include the item you're trying to clean and the model you're considering, Owen reviews all technical inquiries personally.