Sonirity
15L Ultrasonic cleaner | SonicTitan
15L Ultrasonic cleaner | SonicTitan
☑️ Cleans What Cloths Can't Reach
☑️ Ultrasonic Cavitation Technology
☑️ Auto Shut-Off, No Over-Cleaning
☑️ Results in Minutes, No Scrubbing
Couldn't load pickup availability
Why a 15 liter Ultrasonic Cleaner Changes What You Can Process in a Single Cycle:
The carburetors come in pairs. The injector set is eight pieces. The dental tray holds twelve instruments, and the watch movement sits in a parts organizer that measures 22 centimeters end to end. At 6 liters, you're already making choices you shouldn't have to make, running two cycles where one would do, or leaving the larger assembly in a parts tray and scrubbing it by hand anyway.
The SonicTitan 15L was dimensioned to close that gap: an inner tank of 33 x 30 x 15 cm, accepting washable items up to 27 x 22 x 10.5 cm, driven by six industrial transducers at 40kHz and 360W of ultrasonic power. The body is mirror-finish black steel-titanium with a powder-coated matte lid, and the digital control panel tracks both set temperature and actual temperature simultaneously on a dual LED display, which is the detail that separates calibrated cleaning from guessing.
What This Tank Is Sized to Handle
- ● Full carburetor disassembly kits (body, jets, float, pump housing) in a single 40kHz cycle, no partial loads
- ● Dental instrument trays up to 27 x 22 cm run at 60-80°C with the 600W heater holding temperature through the full 30-minute cycle
- ● Circuit boards and precision electronics in Semi Wave mode, where reduced transducer output protects solder joints and surface-mount components
- ● Watch movement batches and eyeglass frame sets where Semi Wave degassing mode clears flux residue from hinge pins without disturbing coating adhesion
- ● Bearing assemblies, gear clusters, and threaded fastener batches that arrive carbon-fouled and need Full Wave power at temperature to clear blind passages
- ● Jewelry production runs requiring consistent cavitation field uniformity across the basket, delivered by the six-transducer array distributed across the tank floor
Full Wave or Semi Wave, How a 15 liter Ultrasonic Cleaner Adapts to the Part in Front of You:
The SonicTitan runs two distinct wave configurations from the same control panel. Full Wave mode delivers maximum transducer output across all six elements simultaneously, suited to carbon-fouled automotive parts, heavily oxidized metal components, and bulk batches of workshop tooling.
Semi Wave mode reduces output to protect items whose coatings, adhesives, or mechanical assemblies cannot tolerate the pressure peaks of full cavitation: watch movements, circuit boards, plated eyeglass frames, enameled dental instruments. The 600W heating element is independent of wave mode, allowing the operator to set solution temperature anywhere from ambient to 80°C and maintain it through a full 30-minute cycle.
Both the set temperature and the live actual temperature display simultaneously on the front panel, so a technician cleaning ultrasonic scaling tips at 60°C knows when the bath has reached target before the timer starts, not after. The stainless steel basket, corrosion-resistant 304-grade inner tank, reinforced side handles, and integrated brass drain valve are all load-bearing decisions in a machine designed to run daily, not occasionally.
The 15L Ultrasonic Cleaner Capacity Your Shop Has Already Outgrown:
Carburetors, injector sets, bearing assemblies, watch collections, surgical instrument trays: the parts that arrive in quantity are rarely the parts a 3L or 6L tank was built to handle in a single pass.
At 15 liters, the SonicTitan's tank holds a full carburetor rebuild kit with room for the float bowl, the jets, and the accelerator pump housing in the same cycle. The included stainless mesh basket keeps parts suspended off the tank floor, which matters because direct contact with the transducer surface creates localized high-intensity zones that can mark soft metals.
The machine weighs 8.6 kg, the power cord reaches 150 cm, and the drain pipe empties the tank without lifting or tipping. If the constraint on your current process is capacity, the answer is not a second small machine running in parallel.
A 15 liter Ultrasonic Cleaner Sized for the Work You're Actually Running:
The technician who switched to a 15L tank didn't do it because they wanted a larger machine. They did it because the time lost to partial loads, the residue left in passages a smaller bath couldn't reach, and the inconsistency between batches had compounded into a workflow problem.
The SonicTitan 15L addresses the volume constraint, the frequency precision, and the mode flexibility in a single unit that drains cleanly, heats reliably, and fits a standard workbench footprint. Browse the full industrial ultrasonic cleaner collection or return to the complete ultrasonic cleaner lineup to compare tank sizes against your specific part dimensions before committing.
Share
FAQ - Ultrasonic cleaner
What is an ultrasonic cleaner and how does cavitation work?
An ultrasonic cleaner uses a transducer to project high-frequency sound waves (typically 40 kHz) through a liquid bath. Those waves create and collapse millions of microscopic bubbles per second a process called acoustic cavitation. Each collapse generates a localized pressure jet that physically dislodges contaminants from every surface it reaches, including recesses, hinge barrels, prong settings, and blind holes that no brush can access.
The result is a contact-free clean that outperforms manual methods in both speed and thoroughness. A professional jeweler in Denver running an ultrasonic tank for 4 minutes on a gold ring pulls out more skin oil and lotion residue than 10 minutes of brushing could reach not because the machine is more powerful, but because cavitation reaches geometry that bristles physically cannot.
How long does an ultrasonic cleaning cycle take?
Cycle time depends on material and soil type, not machine power alone. Defaulting to the longest cycle is not safer over-cycling at elevated temperature can damage coatings and loosen adhesive-held components on items that were otherwise compatible.
Glasses (light soiling) : 2–4 min 50°C
Gold / platinum jewelry : 3–6 min 60°C
Retainer / aligner (mineral deposits) : 5–8 min 45°C
Watch bracelet (no movement) 5–8 min 50°C
Dental instruments : 10–15 min 60°C
Gun parts (carbon fouling) : 15–20 min 60°C
Carburetor bodies : 15–20 min 65°C
How do I contact Sonirity support?
📧 contact.sonirity@gmail.com
For product selection guidance, order questions, returns, and technical troubleshooting. For fastest response on product compatibility questions, include the item you're trying to clean and the model you're considering, Owen reviews all technical inquiries personally.