Ultrasonic instrument cleaner | Proprecision

The Contamination Problem Precision Instruments Face:

Residue packed into the hinge of a hemostatic forceps or dried biological matter lodged in the serrations of a dental explorer doesn't yield to an autoclave pre-rinse alone, it needs mechanical action that reaches where a brush physically can't. Scrubbing hinged or serrated instruments by hand risks cross-contamination and leaves the joint pivot points never fully clean. The Proprecision ultrasonic instrument cleaner resolves this with 40kHz cavitation that penetrates every pivot, serration, and channel simultaneously, with no instrument handling between dirty and clean.

Why 110°C Heating Changes the Cleaning Equation with the Ultrasonic Instrument Cleaner:

Most ultrasonic baths cap out at 80°C. The Proprecision reaches 110°C, a range that matters specifically for instrument cleaning, where higher temperature accelerates enzymatic detergent activation and breaks down protein-based contamination on surgical and veterinary tools that cooler baths leave partially intact. A dental assistant running a full tray of scalers and explorers between patient appointments can dial up to 80°C for a rapid decontamination cycle; a lab researcher cleaning dissection forceps with dried biological fixative can push higher to dissolve it without extended soak time.

Analog Knob Control Built for Busy Environments:

The TIME and TEMP knobs, with separate HEATING and ULTRASONIC indicator lights, are intentionally analog. In a dental operatory or veterinary surgical suite, a technician turning a knob while wearing gloves is faster and more reliable than navigating a touchscreen mid-procedure. The time knob dials from OFF through 10, 20, and 30-minute increments; the temp knob runs from OFF up to 110°C. Simple, repeatable, no mode navigation.

Five Tank Sizes of the Ultrasonic instrument cleaner for Every Volume:

• 3L : watch repair benches cleaning movement tools, tweezers, and case openers in a single cycle
• 6L / 10L : dental practices running mixed instrument trays; electronics repair shops soaking PCB assemblies and component carriers
• 15L / 22L : veterinary clinics processing full surgical sets; precision engineering workshops cleaning bearing assemblies and measurement gauges

The stainless scratch-protection basket keeps instruments suspended off the tank floor, and the brass drain valve makes solvent changes between contamination levels straightforward without lifting a loaded tank.

For high-throughput cleaning environments, this sits within the industrial ultrasonic cleaner range. If your needs are lighter or tank size is the primary variable, the full ultrasonic machine cleaner lineup covers the complete spectrum.